STM32WB-DEV-BOARD
MohamedSharfi
A Dev Board for STM32WBB55CEU
Components (24)
| Reference | Value | Description |
|---|---|---|
| X2 | 32MHz | Four pin crystal, GND on pins 2 and 4 |
| X1 | 32kHz768 | Two pin crystal |
| U3 | DLF162500LT-5028A1 | |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U1 | MIC5365-3.3YD5 | 150mA Low-dropout Voltage Regulator, Vout 3.3V, Vin up to 5.5V, SOT-23-5 |
| U0 | STM32WB55CEUx | |
| SW1 | SW_MEC_5E | MEC 5E single pole normally-open tactile switch |
| R8,R10 | 5kR1 | Resistor |
| R2,R3 | 5KR1 | Resistor |
| R1,R4-R7,R9 | 330 | Resistor |
| P0,P1 | Conn_01x15_Pin | Generic connector, single row, 01x15, script generated |
| L3 | 2n7 | Inductor |
| L2 | 10u | Inductor |
| L1 | 10n | Inductor |
| J5 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J4 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| D1-D3 | LED | Light emitting diode |
| C20 | 0p3 | |
| C18 | 0p8 | |
| C14,C16 | 10p | Unpolarized capacitor |
| C4-C9,C12,C13,C15,C19,C21 | 100n | |
| C1-C3,C17 | 4u7 |
STM32WB-DEV-BOARD schematic
Full page viewerPCB render
