OTAPS_Hardware
Ozonised
OTAPS - An Open Source Train Accident Prevention System
Components (15)
| Reference | Value | Description |
|---|---|---|
| U4 | YAAJ_BluePill_Part_Like | STM32 Blue Pill ; not KLC compliant |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U1,U2,U5 | NRF24L01_Breakout | Ultra low power 2.4GHz RF Transceiver, Carrier PCB |
| SW1 | SW_Push | Push button switch, generic, two pins |
| R9-R12 | 1K | Resistor, small symbol |
| R2,R3,R5-R8 | 470 | Resistor, small symbol |
| J3,J4 | Screw_Terminal_01x03 | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Barrel_Jack_MountingPin | DC Barrel Jack with a mounting pin |
| J1 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| D3 | GREEN | Light emitting diode |
| D2,D4 | YELLOW | Light emitting diode |
| D1 | RED | Light emitting diode |
| C3 | 1uF | Polarized capacitor |
| C2 | 220uF | Polarized capacitor |
| C1 | 22uF | Polarized capacitor |
OTAPS_Hardware schematic
Full page viewerPCB render
